JG-668
热熔胶过胶机
HOT MELT ADHESIVE GLUE MACHINE
特点
1、本机适用于厚度0.5mn以上平面貼合上胶，诸如：鞋类、皮箱、皮件、文具、纸板
盒类、 运动器材等。
2、创新设计之上轮座能上下浮动及压力调整针对高低不平、软、硬、前低 后高材料
亦均能上胶》
3、热熔胶椎经铁氟龙处理，换胶简单，可随热熔的特性调整温度，可有效
4、本机附定温装置，保护马达故障，并装设吸排气机，可排除异味及散热。
5、本机之作业动力马达采用变頻器控制，转速可无段变速调整*
Features:
1,the machine is suitable for thickness of 0.5 mm above bottle surface laminating glue, such as: footwear, luggage, leather goods,stationery, cardboard box class, sport equipment, etc.
2,innovative design on wheel seat can fluctuate and pressure adjustment according to the rugged, soft, hard, former low high
material also all can glue.
3,hot melt glue tank the teflon treatment, in glue is simple, with the characteristics of the hot melt can adjust temperature, which can effectively prevent hot melt adhesive carbonization.
4,this machine with constant temperature device, protect the motor fault, and furnish the suction or discharge machine, eliminate peculiar smell and heat dissipation.
5,the machine operating power motor using converter control, speed can be no period of variable speed adjustment
| 型号(MODEL) | JG-668 |
| 电压（Voltage) | 220伏/220V |
| 电热（Electric heating) | 0.11KW |
| 胶轮（Rubber tire) | 精钢机械制造HongXing |
| 铁轮（Tielun) | 精钢机械制造HongXing |
| 温控表（Temperature table) | 上海超能Chaoneng |
| 固态（Solid-state) | 曰本欧姆龙Omron |
| 开关（Switch) | 高德GaoDe |
| 机器尺寸（Machine size) | 71X43X70 |
| 机器重量(The weight of the machine) | 40KG |
| 产量(Yield) | 1800双/8小时 1800Pairs/8Hours |
