超低温热熔胶\环保热熔胶\鞋用热熔胶

70cvalue="80" UnitName="C">-80c by a heating plate Teflon coated, that allows an ideal tempeature control. Other heat sources can also be used, such as ovens, lamps, hot steam.

◆ The pre-heated counter softens very quickly. As the special adhesive does not stick the fingers, the operator can easliy insert the counter between upper and lining manually. Then the counter is moulded and stuck by the moulding machine.

◆ Advisable standard working conditions: From value="100" UnitName="C">100c to value="130" UnitName="C">130c according to the type of lining and upper used (natural or synthetic). The contact time is from 10 to 15s (higher temperature allows shorter contact time)

140c to value="150" UnitName="C">150c according to the type lining and upper used (natural or synthetic). The contact time is from 18 to 22s (higher temperature allows shorter time).

Ps: the following cold stabilization (given by the above mentioned special machine,with two stations) gives a very moulded counter..

-1.2mm, and the products are packed in slice.