高发泡成型机
HIGH FOAMING MACHINE
结构特点：
效率高：采用特制钢管制成加热板，热传递面积大.加热快，冷却快.与同类产品相比效率高20%。
省耗材：型腔钢板经过磨加工，平整光亮，能省脱模剂.
省蒸汽：机台采用保温设计，在机台四周形成一个隔热罩.从而 节省蒸汽。
本设备可PLC全自动控制，按生产工艺要求，输入水、汽、气工 作时间自动完成一个工作周期.
STRUCTURAL CHARACTERISTICS
High efficiency: The heating plate made from special steel, it is featured as big heat transfer area, quick heating, rapid cooling, and efficiency compared to similar products by 20%.
Saving supplies: The cavity plate after grinding, smooth and bright, it can save release agents.
Saving steam: the machine uses thermal design, it forms a heat shield around the machine to save steam.
The device made from PLC automatic control, according to the production process requirements, it enters the working time of water, steam and gas to complete a work cycle automatically.
适用范围：
EVA、PE, PVC高倍率发泡成型.发泡倍率25 ~ 45倍.
SCOPE
EVA. PE, PVC foam molding at high rate, the expansion ratio is 25 to 45 times.
技术参数/technical parameters
| 参数型号 | Parameters Model | 1000x2000x6 | 1200x2400x6 | 1500x3000x5 |
| 型腔尺寸（mm) | Cavity Size (mm) | 1100x2150x110 | 1350x2600x100 | 1600x3200x93 |
| 层数 | Layers | 6 | 5 | 5 |
| 层间距 | Spacing (mm) | 150 | 150 | 150 |
| 油缸直径（mm) | Cylinder Diameter (mm) | 2-0100 | 2-0125 | 2-0140 |
| 电机功率（kw) | Motor Power (Kw) | 5.5 | 5.5 | 5.5 |
| 蒸汽压力(Mpa) | Steam Pressure (Mpa) | 0.6 | 0.6 | 0.6 |
| 冷却水压力（Mpa) | Cooling Water Pressure (Mpa) | 0.2 | 0.2 | 0.2 |
| 压缩空气压力(Mpa) | Compressed Air Pressure (Mpa) | 0.6 | 0.6 | 0.6 |
