双冷双热后踵定型机/可做后踵在整型 JG-6061

JG-6061
双冷双热后踵定型机/可做后踵在整型
BACKPART MOULDING MACHINE WITH 2 COOLERS AND 2HEATER(AGAIN AFTER THE HEEL CAN INTEGER)
特点：
1)双冷双热模组，产量大，生产效率离.
2)热内外模温度可个别调整，可适用各种不同材质之韃面与内里的加温需求‘
3)经预定型后之鞋后踵，衬套完全与鞋面及内里粘合，不易脱离及内里完全拉平，
提高鞋面品质，减少不良率。
4)斜面机台设计操作简单又方便。
5)夹具可做行程调整或选择不用，适用各种不同鞋型，
6)模具依客户鞋型，可获得最准确定型效果。
7)特殊反面模可做不良品之再整型，消除皱纹及堆加鞋口之美观。
8)环保之冷冻系统独特设计，效率高，冷却速度最快，正常运转10分钟内蒸发器可达20°C以上。
9)采用微电脑控制,溫度更准确，操作更方便

Features:
1)The dual-coolcd dual-thermal modules,large production capacity,production and high efficiency.
2)Heat inside and outside the die temperature can be individually adjusted,applicable to a variety of different materials inside of the uppers with the heating demand.
3)The post is scheduled after the heel of shoes,complete with the upper bushing and adhesive inside,not inside out and completely leveled to improve the quality uppers,non-performing rate reduction.
4)Inclined plane simple machine design and cinvenient operation.
5)The fixture can be adjusted or do not travel for a variety of different types of shoes.
6)Mold in accordance with customer-type shoes may be the most accurate results stereotypes.
7)A special mode to do the opposite of the re-integer non-performing products to eliminate wrinkles and increase the population of the beautiful shoes.
8)Environmental protection of the unique design of refrigeration systems high effciency.the fastest cooling rate.the normal operation of the evaporator 10 minutes up to more than 20 degrees.
9)The use of microcomputer control,the temperature is more accurate,more convenient operation.

APPLICATION:
Stereotypes and sfter the post-heel shoes,heel and re-shaping of the mouth