JG-880
微电脑气压式冷热滚压贴合机
THE MICROCOMPUTER PRESSURE TYPE COLD HOT ROLL LAMINATING MACHINE
特点：
1.人员（4-6人）可坐在输送带两侧，做面料与热熔胶放置工作。
2.当热熔胶塑片放置在面料位置，此时直接摆放在输送带上，材料会随输送带进入机台内，会自动加温滚压、贴合。
3.此机台可省略油压压烫机操作员，不需人员做压烫黏着的工作。
4.此机台压着采用气压式加压，输送带速度为可调速。
Features:
1.The personnel (4 to 6 people) can sitting on the conveyor belt on both sides, do fabrics with hot melt adhesive is placed.
2.When the fabrics of hot melt adhesive plastic piece placed in the position, when placed directly on the conveyor belt, conveyor belt material with Will enter inside the machine, automatic heating roller, joint.
3.This machine is used to omit hydraulic press operators, do not need to staff do ironing gelling.
4.This machine is used pressure adopts baromctric pressure, conveyor speed is adjustable.