JG-933
自动定位万能油压压底机(单边）
AUTOMATIC POSITION OIL PRESSURE UPPER MOLDING MACHINE(Monolateral)

特点：
1)本机采用全油压设计、压力大、贴合牢固、压低、压边、前后束可一次完成，也可单独造作，平底、包边及特殊包边设计鞋，皆可操作使用，一机多用。经济效益高。
2)适用各种类型鞋子，非一般墙式及气囊式压底机可比凝。
3)使用特殊设计多支密排式油压缸，能配合鞋边不规则轮廓，且压边平衡，没有死角，效果更佳。
4)压杆相通的设计，使鞋底于压底时，受里均匀，不产生空隙；且压杆自助横移定位设计，使鞋子取放方便无阻凝，能提高产能，且不使些面受损，除一般鞋类外，无论长统或半长统鞋，都能方便操作。
Features：
1)This machine adopts full hydraulic desigo.pressure.solid fit>Down,pressure sidc.before and after the beam once completed.can

also be a separate artificial.flat-bottomed.including side edge design packages and special shoes,and can be used to operate a

multi-purpose machinc.the high economic effectiveness,
2)Applies to all types of shoes,non-general-style wall and the balloon pressure at the end of the suspect machine comparable.
3)The use of specially designed more than close-packed-type hydraulic cylinder,can be lost with the irregular edge profile shoes and Blankholder balance,there is no dead ends,the effect of good sense.
4)The design of same barrso that the pressure at the end of the sole,even by years,no gap;and positioning and transferring the

design of self-service bar,so that pick-and-place shoes condensate convenient access to production capacity,and do not make uppers by loss,in addition to more general categories,incompetent or quasi-long-lomg EC Ecshoes are convenient to operate.