JG-6063
单冷单热后踵定型机 
BACKPART MOULIDING MACHINEWIH COOLERS AND HEATER
特点：
1)加热模采高级耐热矽胶，
2)内外模温度可个别调整（视不同材质而定）。
3)经加热后在用冷却模定型，效果佳，速度更快。
4)定型后内里，衬套与鞋面紧密粘合，不易脱离，不起泡，确保品质。
5)定型后结帮作业更迅速，提高产量，降低成本。
6)采用反面模即可做后踵之再整型，消除维纹及鞋口开张之弊端，减少浪费，降低成

本。
7)鞋模可任意订制，换模简单容易。
8)适合少量及开发室用。
Features：
1)Heating mode High heat-resistant silicone taken.
2)Both within and outside the die temperature can be individually adjusted(as determined by difTcrcnt materials.)
3)By hesting followed br cooling mode shape,better,faster
4)After shape inside,with the upper bushing closely, bonded and difficult to leave,non-foaming to ensure quality.
5)Stereotyped operation after the node to help more quickly,increase productivity and reduce costs.
6)The use of negative mode can be done again after the heel of plastic to eliminate wrinkles and mouth opening of the drawbacks of reduce wastage and cut costs.
7)Mode of shoe can be customized,for simple and easy mode.
8)For and development of a small amount of room.
APPLICATION:
1) After the heel of the target type. 2) Molding and post-heel shoes I no longer integer.
用途：
1)后踵之预定型。2)成型后后踵及鞋口再整型。